Weathertech digifit mats for 2013?

[CKK]

Originally Posted by CKK

Good! Thanks

Originally Posted by Harvey

Oh, that second row fit is unacceptable.
I was about to order a set myself for my 2013 but not if that's the way they are going to fit.
If you pursue this further, please keep us posted.

I guess Subaru did change the floor pattern on 2013 Outback. The rear liner was designed for 2010-2012 OB.

[jrabdawg]

I called McNeil/WT and asked to be put on the call list once they verify/build for the 2013.

[Harvey]

I just got this:


Thank you for your interest in MacNeil Automotive- Weathertech

The 2013 Subaru Outback will not be approved by our engineer department until late Fall or even beginning of next year; there is a chance it could be released sooner. If you would like to fill out our product request form: http://www.weathertech.com/service/product-request-form/ we can notify you once the 2013 Outback becomes available. If you have any questions please feel free to call or email us back.

[jrabdawg]

I went ahead and filled out that form too. Maybe if enough folks beg, they will rush.

[GasGuzz]

Originally Posted by CKK

I guess Subaru did change the floor pattern on 2013 Outback. The rear liner was designed for 2010-2012 OB.

How long has it been sitting there? That might be just material memory from packing/shipping. Park the car out in the driveway overnight, and let it heat/cool acclimate.

[Latigo]

Originally Posted by GasGuzz

How long has it been sitting there? That might be just material memory from packing/shipping. Park the car out in the driveway overnight, and let it heat/cool acclimate.

That's what it looks like to me too.
I had these in my 300 and wife's Camry, both did this out of the box. I took a low powered heat gun to the outer edge of the Camry's rear mat after it didn't fully extend. Worked fine.

[Carlvr87]

The ones I had in my 2011 fit perfectly in my 2013. I do remember having to "flatten" them out alittle when I got them for my 11.

[CKK]

See the difference:
1. Pic from cars.com
Tested: WeatherTech DigitalFit Floormats - KickingTires
2. 2010-2012 liner on my 2013 OB.

Pay attention to the highlighted area.

[CKK]

Originally Posted by CKK

See the difference:
1. Pic from cars.com
Tested: WeatherTech DigitalFit Floormats - KickingTires
2. 2010-2012 liner on my 2013 OB.

Pay attention to the highlighted area.

Got a reply from WeatherTech, saying 2010-2012 Outback that the Digi Fit liner was tested for has a curve edge at the rear door side. That's why the liner has a corresponding curve. For those who have a 2010-2012 OB, could you confirm the existence of the floor curvature? 2013 OB does not have.

[Harvey]

Originally Posted by CKK

Got a reply from WeatherTech, saying 2010-2012 Outback that the Digi Fit liner was tested for has a curve edge at the rear door side. That's why the liner has a corresponding curve. For those who have a 2010-2012 OB, could you confirm the existence of the floor curvature? 2013 OB does not have.

That's what the problem is then. You can see the difference in CKK's pictures. I guess we will have to wait then. Good work!