Quote:
|
If I remember correctly the jackstands are located at the bushing area for the lower control arm. My jackstands have the curved surface you describe, definitely not for use with a pinch weld. I've used this type of point on my other cars in the past. Because the bushing area of the car is strong enough to deal with lots of stress, placing a jack stand there shouldn't be a problem.
|
I don't have any better pics of this location, hope that's good enough for now.
Also once you install a skidplate like this one, you'll still be able to jack the car from the center jackpoint, located just behind the two bolts at the back of the skidplate.