Subaru Outback Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 21 Results
  1. Lighting, Electrical & Electronics
    Hey Y’all, Today I installed a hitch on my 2024 OBW, and while removing the bumper cover I made the unfortunate mistake of pulling out the gray bit of electronics in the while sleeve located on top of the metal bumper bar. In this process I broke the magnetic bar inside of the sensor. Anyone...
  2. Gen 5: 2015-2019
    Does anyone know or have resources or spec sheets on if the the facelift for the front end for the 5th Gens (15-19) that was done between ‘17 and ‘18 is compatible? I’ve looked at both back and forth for the past week and seemingly the only mounting difference or hiccup might be the tow loop...
  3. Gen 6: 2020-2024
    So, this is the second time my Outback has been hit. The first time I was in at work and someone clipped my back right trying to pull out of the parking space. The at fault party’s insurance was a breeze and I took it to my Subaru dealership and they replaced the busted taillight and the entire...
  4. Gen 4: 2010-2014
    Hi All, Any idea if a Gen 4 2013+ grille and front bumper would fit on a 2010? On close inspection of the two models, it seems the front bumper and grille fascia are the only difference between the front of either vehicle. Mine's silver and I'm in Oregon... Anyone know if it's possible or...
  5. For Sale / For Free
    Subaru part number 57711AN06A9P. Impact bar for Outback rear bumper. I removed this beam to replace with a factory trailer hitch on my 2022 Outback. It is basically brand new. Labeled in diagram as item 10.
    $60 USD
  6. Performance Parts & Accessories
    I currently have a rally innovations light bar installed and am wondering if it might be possible to have the bar along with this warn bumper. For the light bar, there are 2 cuts made at the front corners of the engine splash shield. Main concerns are if the warn bumper would attach to the...
  7. Problems & DIY Maintenance
    I got this car less than a year ago it's 2013 and I've already driven it across the country and put around 30k miles on it without incidence but using my covered parking space for the first time which has a speed bump directly at my spot I did a number on the bumper making a huge dent and...
  8. General Discussions
    I got this car less than a year ago it's 2013 and I've already driven it across the country and put around 30k miles on it without incidence but using my covered parking space for the first time which has a speed bump directly at my spot I did a number on the bumper making a huge dent and...
  9. Gen 3: 2005-2009
    Hi all, I am currently trying to sort out rusty sections on my recently purchased '08 Outback. The rear bumper beam assembly (name taken from workshop service manual) is particularly rusty and I've tried removing it, but having no luck. I have removed the 3 nuts (img below) securing it each...
  10. Offroad Tech
    This is m first post so sorry if its a bit hard to follow, I have a 99' legacy outback and I want to turn her into an overland esk camping rig. I'm trying to find options for front bumpers or bull bars because the stock bumper just looks too good with the fog lights hahaha. If you have any...
  11. Gen 4: 2010-2014
    Hello, was searching for a rear bumper for my Outback 2010 for a while and just purchased one online. I'm now realizing it's a 2015/16/17 bumper. How incompatible is the bumper?
  12. Performance Parts & Accessories
    For those of you who have ever looked at SubaXtreme - in particular, their front & rear bumpers. I contacted them a few weeks ago, and received a response. Since there really isn't a whole lot of info on US availability of these bumpers, I figured I'd share the response I got: TL;DR: You...
  13. Gen 1: 1995-1999
    Long story short, I slid in the snow and I need to replace my bumper, ac condenser, grill, and bumper cover. I'm pretty certain the 2000 outback parts from my local pick'n'pull will work, but wanted to check if anyone has any tips, or if you've done this before.
  14. Performance Parts & Accessories
    I saw this photo on eBay and I initially thought it was a 07-09 legacy sedan bumper on The OB but then I noticed the diffuser looked like an aftermarket bumper. Can anyone identify this bumper or share experience with fitting a sedan bumper to the outback and putting arches on to complete the look?
  15. bumpertrimmed3

    Approach angle is up to roughly 35 degrees now. I'd buy that for a dollar.
  16. bumpertrimmed2

    More angles.
  17. bumpertrimmed

    All trimmed up, gonna work on a protection plate for the radiator support now.
  18. bumpercover

    The inside of the fascia, layed against the side of the wagon for reference. This thing is monstrous.
  19. bumperbare

    Bare bumper without the styrophoam.
  20. bumperbacking

    Whats behind that front fascia plastic piece? Styrophoam! Before you go off saying Scoobys are cheap, most manufacturesrs put styrophoam or something similar behind their bumpers as a shock absorbers.
1-20 of 21 Results
Top