Subaru Outback Forums banner
  • Hey everyone! Enter your ride HERE to be a part of September's Outback of the Month Challenge!
1-3 of 3 Results
  1. Engine & Drivetrain
    I have been doing some research into new motors for my car which is a 05 2.5L without the EGR and found that you can get a motor from a newer outback e.g. a 07 that has EGR and cut and weld the EGR pipe shut and transfer the intake manifold from the original motor onto the new one. Can anyone...
  2. Problems & DIY Maintenance
    2002 Legacy/Outback H6 3.0 VDC I've posted a few times about this between posts but I'd like to touch this specific issue and add things I've done so far and symptoms: Symptoms: Idle is low, 570 - 780 or 800 rpm's. Seen with Obd stick. Roughness idle has been less prominent (lug lug lug lug...
  3. Problems & DIY Maintenance
    2002 Legacy/Outback H6 3.0 VDC EZ30D engine Trying to find out what the bolt size is for the EGR Valve (2 bolts holding it in, screwing Up ⬆️ attaching to the intake manifold on the back side, NOT the bolts that affix the tube to it. That was 13/32. The size I know is between 1/2" and 13/32...
1-3 of 3 Results