Subaru Outback Forums banner
  • Our 4th of July contest is live! Enter HERE for your chance to win a $400 Walmart gift card.
  • Hey everyone! Enter your ride HERE to be a part of this month's Outback of the Month Challenge!
legacy
1-20 of 20 Results
  1. Problems & DIY Maintenance
    I am currently looking for a new ej253 for my outback as my previous motor had the timing belt snap and most of the valves are bent. I am wondering if the same motor from a Liberty/Legacy will bolt straight in? and also my car has a manual trans so will an automatic motor bolt straight in or...
  2. Gen 4: 2010-2014
    I have a 2013 Subaru Outback 2.5i (fb25) with the cvt. It has a 3” lift kit, 30” all terrain tires, and other off-road mods. I don’t have the power, throttle response, or torque that I want. Most of that is to blame on the cvt. So i am looking at manual swapping it. Also I want my outback to be...
  3. Gen 3: 2005-2009
    Am replacing the driveshaft of my 2006 Outback H4 2.5L 4AT (rear U-joint is bad). Purchased a used driveshaft from a local salvage yard that came from a 2006 Legacy H4 2.5L 4AT. (When I searched for used parts, I was led to believe that a 2005-2009 Legacy driveshaft was compatible for a...
  4. 2003 Legacy L SE 5MT

    Rust free California car, have basically full service records. Plan to keep this one forever, so it's well taken care of. Installed fresh KYBs, fresh OEM Subaru clutch kit, sealed up the leaks, top fluids, high performance tires, stays off salted roads. Dealer that did the airbag recall said it...
  5. Problems & DIY Maintenance
    Hi all, I have a subaru liberty 2010 2.5 auto (from my understanding the australian version of the legacy) at about 180,000km's. Upon driving a week ago for about 15 minutes through light traffic my at oil temp (flashing), VCD, and what looks like the hand brake light but with a line through...
  6. Wheels, Tires, Brakes, & Suspension
    So I recently purchased a 30th Anniversary Legacy with 165hp, all interior leather and wooden dashboard panels, with only 91k miles. 1 problem it’s far too high off the ground, I can’t seem to find any coil overs that specifically states for a 99 legacy outback. I know there has to be a model...
  7. Parts, Accessories, & Performance
    I've been thinking of putting a body kit on my 2012 outback, but have not been able to find anything until I read a thread, (https://legacygt.com/forums/showthread.php/ca-rare-jdm-front-spoiler-280096.html?s=ca7b72e8be4a8c02a62574d9f5be0b54&) that was talking about fitting a legacy kit on a...
  8. For Sale / For Free
    A Nice condition VDC Sedan is up for sale. Three owners, with paperwork, the Subaru has had an easy commuter car life with good maintenance history detail. I Bought the car in 2012 with 100k as my primary go-to work car. Several trips up to Maine and back. It did spend a short summer in Maine...
  9. Gen 2: 2000-2004
    I have a 2001 Legacy wagon with a standard transmission. I am considering switching to Outback struts for this year, as well as upgrading to Outback class 225/60 tires. I am doing this to increase ground clearance. Are there any other aspects of the suspension hardware that are specific to the...
  10. Gen 2: 2000-2004
    Hello, first things first. It’s a 2.2T Has spark fuel and none of the air lines or air box is clogged with a brand new filter. It started and ran a few days ago and since that night it no longer runs. Starter engages it’s got spark to all 4 And 20-25lbs of fuel pressure. And been through all the...
  11. Forum Rules, New Member Information & Intro.
    Hi has anyone ever installed a single zone unit into a double zone? Have put in aftermarket headunit, but kit came with a single zone when car has a double zone. Works when plugged on but have no display on the screen. Is there any way to make it work or do I have to get another dual zone unit...
  12. Head Gasket Issues
    Just wondering if the head gaskets ever leak out on top of the motor? I have a 04 outback SOHC. I have some coolant pooling up on the passenger side top of motor, it's right by the upper radiator hose but when I feel under the hose it's not wet.
  13. Wheels, Tires, Brakes, & Suspension
    My cv axle is seized into my hub assembly at this point I’ve given up trying to remove it and am just trying to find a new steering knuckle as I’m rebuilding my entire suspension anyways. As it so happens tho it is almost impossible to find a steering knuckle for my 1999 legacy outback anywhere...
  14. General Discussions
    Hello all! I have a 1999 30th anniversary legacy outback limited someone grenaded the bottom end of a dohc ej25. I would really like to put in a jdm sohc 2.5 ej25 in it. Everything on top is good but my dohc block is not rebuildable. can I just pop the jdm sohc ej 25 in there using my intake...
  15. All Other Subaru Models
    I am thinking of turbocharging my 04 Subaru Legacy, it is auto but I think that shouldnt be a big issue. I was wondering if anyone had any pointers or where to start on this part of my build! Thanks Again! :)
  16. Wheels, Tires, Brakes, & Suspension
    I am trying to lift my 2004 Subaru Legacy however I don't know where to start lol. I heard some guys will use forester struts for older outback's and legacy's, but i dont think they will work on mine! I was looking into spacers for the top hats just need some tops and advice! Thanks!
  17. Parts, Accessories, & Performance
    Hi there! I am trying to mod my 2004 Subaru legacy with Forrester struts off a 2007 Columbia edition which is the first time I’ve Ever done this project and I love my Subaru’s. I was watching videos on how guys will change Impreza struts to Foerster struts to give it a 2 inch or 2.5 inch lift...
  18. Gen 1: 1995-1999
    1999 Subaru Legacy Outback 2.5 295,000 miles symptoms: for about 3 or 4 years, my car does two things I cannot figure out. 1. when cruising up a particular long hill, medium grade, it lurches just slightly, but ongoing. 2. when traveling I'd say 25 mph or slower, if I punch it, it bogs...
  19. Gen 3: 2005-2009
    Hi all, I'm hoping someone here maybe familiar with the communication used on the instrument cluster from an Outback Legacy BP9 (Part number: 85012AG030) . I'm hoping to use the cluster with an arduino and control it via that for racing games :) I'm familiar with car protocols such as can bus...
  20. Outback Limited

    Just got back from exploring some roads around here.
1-20 of 20 Results
Top