Subaru Outback Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-5 of 5 Results
  1. Gen 3: 2005-2009
    I've been looking more seriously into a new exhaust for my 2006 outback 2.5i, and in my search have only found 2 real bolt on options. The one I was more interested in is the Nameless exhaust seen below.
  2. Lighting, Electrical & Electronics
    So my ignition cylinder went out on my 2005 outback sedan 3.0 when I went to a store( which I’ve dealt with before 3 years ago in my 2005 OBS 2.5i ) which was a plug and play scenario no problem. But now I pulled the cylinder and tried to manually switch the ignition switch to turn it on and...
  3. Gen 3: 2005-2009
    Hello, I have an 09 outback XT limited. I am just about to drop my engine back in it and am waiting on a clutch kit. I have a flywheel Exedy FF502 attached at the moment but have read that the flywheel won't fit with my OEM clutch kit. I am just curious to know what Exedy clutch kits can I use...
  4. Problems & DIY Maintenance
    Thought it'd be about time to change differential oil. Outback is about 180KM now (bought it around 150KM in), not sure when differential was last changed. Went to pull on the front differential dipstick, and smart me accidentally broke the loop handle of the dipstick. There's just a little knub...
  5. Gen 3: 2005-2009
    I wanted to check the TPS (gas pedal) before pulling the throttle body and I found a 'test' on autozone repair guide saying to test the 1st & 2nd pins (6.10 kohms) and 7&8 (6.08 kohms) then check resistance between 2&3 (6.03 kohms) and 8&6 (0.18 kohms) while gently depressing the pedal to check...
1-5 of 5 Results