Subaru Outback Forums banner

00 axle & 99 axle

814 Views 4 Replies 3 Participants Last post by  avk
Does anyone know what the differences are between a 2000 Legacy OBW axle and a 99 legacy OBW axle?? I know that the hubs on a 2000 are a bit bigger, but both the 00 and the 99 have phase two trannies(meaning the inner joints would be the same) and I can't imagine the axle splines themselves to be different...I mean...It's possible but...I'm really hoping to use the 00 axle on the 99. Is the drive axle longer, thicker in diameter, or what??
1 - 2 of 2 Posts

· Registered
98 obw & 99 obw
147 Posts
Discussion Starter · #4 ·
you can use a 00 axle on a 99 if you knock the tone ring off.
i don't know if you have to knock it off, but i have always done it and heard you should.

you cannot use the 99 on the 00 if you want to have the ABS work. the axle splines will fit, but the tone ring will be missing.
You are the man :)
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.