Subaru Outback Forums banner
  • Hello Everyone! Let us know what you would spend a $50 Amazon gift card on, HERE For a chance to win a $50 Amazon Gift Card!
  • Submissions are now being taken for JUNE OUTBACK OF THE MONTH
1 - 2 of 2 Posts

·
Registered
2010 OUTBACK 2.5 LIMTED, TINTED WINDOWS, DVD HEADREST, REAR SWAY BAR UPGRADE
Joined
·
21 Posts
I did the HID retrofit on my 10' OB I did NOt take the bumper completely off the car but took all the push pins off the top by the grill and from the wheel wells and under the bumper after that it was 5 bolts and or screws and a push pin and unplug the wire harness and the light was free. done the retrofit about 2 mo. ago and loving it.
 

·
Registered
2010 OUTBACK 2.5 LIMTED, TINTED WINDOWS, DVD HEADREST, REAR SWAY BAR UPGRADE
Joined
·
21 Posts
I did have to drill the cap on the back of the headlight but don't remember if it was 7/8" or 1" I would start with 7/8 and go from there. Wasn't that bad of a project but will take about 2 to 3 hrs. for both sides.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top