Subaru Outback Forums banner
  • Hey everyone! Enter your ride HERE to be a part of October's Outback of the Month Challenge!
1 - 2 of 2 Posts

·
Registered
2001 Outback 2.3 4 cyl
Joined
·
10 Posts
Discussion Starter · #1 ·
I have a 2001 OB 2.5 AT. The clutch was engaging intermitantly and i replaced the master, slave cylinder, clutch, flywheel, throwout bearing, and knock sensor. And still the same problem persists. The clutch will not engage fullly and the RPMs tach up untill it somewhat engages through all of the gears. I need help.
 

·
Premium Member
01 VDC, 05 R Sedan, 06 BAJA EJ257
Joined
·
16,269 Posts
I have a 2001 OB 2.5 AT. The clutch was engaging intermitantly and i replaced the master, slave cylinder, clutch, flywheel, throwout bearing, and knock sensor. And still the same problem persists. The clutch will not engage fullly and the RPMs tach up untill it somewhat engages through all of the gears. I need help.
Manual? What you posted relates to a manual but you put AT.

If the hydraulic fluid is not bled out completely, its like a MC, no pressure. If there is an obstruction in the line between the slave and clutch cylinder then it is allowing for pressure to reside on the slave even though your foot is off the pedal.

How much trash came out of the line when you flushed it?
 
1 - 2 of 2 Posts
Top