Subaru Outback Forums banner

1 - 6 of 6 Posts

·
Registered
2008 Outback 2.5i, 2009 Forrester 2.5 sohc
Joined
·
606 Posts
Discussion Starter #1

Attachments

·
Registered
Joined
·
257 Posts
I have seen different washers on the center bolts of earlier engines.
If I remember correctly, they all have the same washers that the center bolts used to have on them now.
 

·
Registered
2019 Outback Wagon 2.5i limited
Joined
·
307 Posts
I ordered a set of Subaru head bolts.

https://www.amazon.com/gp/product/B01DWNRKD6/ref=oh_aui_detailpage_o09_s00?ie=UTF8&psc=1

Head Bolt Outer 11095AA123 X8 & Head Bolt Inner 11095AA141 x4

They look the same, short of taking a micrometer to them.

Do the inner bolts go in position e and f in the attached drawing?
Head bolts are not usually needing replaced. When I did my head gaskets, I watch a few YouTube videos by Subaru mechanics and they say you can tell if they are stretched by the feel when you torque them down. I had no problem reusing and that was 50k miles ago. Save some money, the other parts are expensive enough!
 
1 - 6 of 6 Posts
Top