Subaru Outback Forums banner
1 - 2 of 2 Posts

·
Registered
Joined
·
4 Posts
just did my rear brakes yesterday. i replaced with r1 rotors and pads, i got the cross cut and drilled rotors. the pads and rotors cost $ 105 with shipping. i got them from amazon. as cheap as they were ive read alot of positive reviews on the rotors. i went with evolution z23 rotors and pads for the front but im going to wait until after summer to replace the fronts, they are in good shape still. i think the eyesight and adaptive cruise control is what wore my rear brakes down considerably faster than the fronts
 

·
Registered
Joined
·
4 Posts
ive heard great things about ebc, ive also heard that the rotor blanks they use are the same as the r1 and the power stops( i can not confirm if this true). ive read that most of the more well known companies use the same steel blanks for the rotors, its what they do to them when they get them at their factory, cut & drill and/or coat them, that makes them unique to to the brand.
 
1 - 2 of 2 Posts
Top