You wont have to worry about any limp mode in that mod. I used to remove the ABS fuse on my 98 2.5RS and my 96 lifted Legacy sedan for rally-x events. I never had any problem and I definitely had full power.
You could also put a pig tail in there to relocate the fuse and have the switch in line so all wiring is under the dash. That way you don't have to figure out what wire does what at the pump. Just a thought.
Good luck.
You could also put a pig tail in there to relocate the fuse and have the switch in line so all wiring is under the dash. That way you don't have to figure out what wire does what at the pump. Just a thought.
Good luck.
