Subaru Outback Forums banner
1 - 1 of 2 Posts

· Registered
18 horizontally opposed cylinders of fury
560 Posts
There aren't many discrete components to check for the problem you're experiencing. If your vertical leveling isn't always correct when it's operational, I would look at the rear height sensor for any apparent damage or wiring/connector issues. The PDF has info on that. You wouldn't think a leveling fault would disable SRH, but lots of these advanced features are interdependent.

Is there any indication anywhere of wire damage by rodents? That's always a possible explanation for intermittent problems. The service manual lists about 15 Uxxxx & Bxxxx fault codes for the auto leveling headlamp system but you would need a scanner capable of reading those kind of codes.


1 - 1 of 2 Posts