Anyone see a problem with installing this spring kit on an 05 OBXT? Says it fits 02-04, but if the struts are interchangeable between 04 and 05 wouldn't the springs be also? Might need a few spacers to level it out, if so that's not a problem.
Eibach Pro Kit from 04 on an 05 OBXT?
1 - 2 of 2 Posts
Subscribed for info.
1 - 2 of 2 Posts
Join the discussion
Recommended Reading
-
Perpetual oil leak; does god hate me?
Gen 3: 2005-2009Sorry for the melodramatic title, lol, but I’m having a serious facepalm moment today. 2008 2.5i (non-turbo) Outback 5-speed. I’ve been trying to track down the source of some occasional smoke coming from the passenger side of my engine bay. I check under the hood practically every time I park...- 37
- 839
-
Dead end wires? Missing fuses?
Gen 3: 2005-2009So I’m not actually sure if this is causing any kind of problem, but it seems weird. I was checking out the fuse boxes (is there specific nomenclature to differentiate the one under the steering wheel from the one in the engine bay?) the other day mostly for curiosity’s sake, and it appears to...- 3
- 67
-
PO420 Continuing Saga
Gen 3: 2005-2009I have an '05 2.5i OB stick with 150K miles. The PO420 code has been on for the last several years. The car runs fine. The only problem is every 2 years it needs to be smogged and re-registered. Won't pass smog with the CEL and PO420 codes on. Manual re-set of the codes clears the codes but...- 22
- 959
-
OK I'm puzzled now. p0420, p0303 & p0304
Gen 3: 2005-2009I'm kinda new to these subies and I don't really understand how these codes can come and go. About a month ago when my son bought this car. These two codes popped up and the car wouldn't run. Towed it to the place he bought it from and they fixed it and inspected / emission test and put the...- 35
- 577
-
Where does this wire go?
Gen 3: 2005-2009Hi all, I was poking around in my engine compartment today and found this wire (picture attached) just floating around going from the negative battery terminal. It looks like a ground but i don’t know where it is supposed to be bolted to. Any ideas?- 8
- 203
Join now to ask and comment!