Subaru Outback Forums banner
1 - 1 of 8 Posts

· Registered
'69 Chevy El Camino, '01 Subaru Outback, '03 Porsche 911
41 Posts
You can get old studs out with a BFH. Some people screw a lug nut on backwards to the lug nut to give you something to aim at, which makes it a little bit easier.

When installing new studs, do not install them with a BFH. Either have them pressed in (which you can't do with the hub on the car), or use a couple of nuts to "draw" the studs in as you tighten the nuts.
1 - 1 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.