Subaru Outback Forums banner
1 - 1 of 8 Posts

· Premium Member
(formerly) 03 H6 OBW , (presently) 06 WRX Sportwagon & 2021 Honda CR-V
19,213 Posts
DO NOT use a stud that is too long. triple check that you have true OEM equivalent studs and nuts - and that the rotor is the OEM thickness over the hub, and any aftermarket rim is 'stock' thickness.

any changes to the dimensions above could mean either the nut bottoms on the stud, or not enough threads are engaged.
1 - 1 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.