Subaru Outback Forums banner
1 - 1 of 19 Posts

· Registered
96 Legacy OBW, EJ22 swap, 2" suspension lift, 215/75r15, HIDs, 06 WRX interior swap
341 Posts
if it looks the same it will probably work.

things to be sure are the same:
-bends in hose for correct routing
-diameter so it will seal properly
-length. might be ok with too long and can cut it but too short will be a waste of time.
1 - 1 of 19 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.