Subaru Outback Forums banner
1 - 1 of 5 Posts

· Premium Member
01 VDC, 05 R Sedan, 06 BAJA EJ257
19,526 Posts
Security Control Module

1.Remove the key from the ignition switch.
2.Close all windows.
3.Close all doors and the rear gate or trunk lid.
4.Cover the hood with a blanket.
5.Press the LOCK/ARM button of the transmitter.
6.Confirm that the security indicator light blinks every 2 seconds .
7.Hit the center of the windshield with your palm and make sure the alarm operates. If NG, adjust the impact sensitivity.

Mine has a screw adjustment to adjust the sensitivity. Pull it, adjust, retest.
1 - 1 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.