[Steindor15]

For those of you that have removed the original roof rack system...

I'm looking for the metal plate that the rear crossbar bolt threads into. It's square and held in place by two torx bolts with fender washers, on the underside of the rail. If you've removed your rack you should know what I'm talking about.

Anybody willing to part with it? Dealer wants $360 for the entire Roof rail assembly, all I need is that one plate. Thanks in advance.

 

[Steindor15]

This is the same piece, but off of a Gen4. The Gen5 piece has one hole, and is secured by two torx bolts/fender washers

 

[ncdave]

If you have one from the other side, and no one here has an extra, you probably could get one fabricated at a local metal shop (or cut & tap one yourself).

 

[Ali Pine]

Auto Recycler - Salvage Yard - Junk Yard - U-pull it