Head Bolt Removal Sequence
Join the discussion
Recommended Reading
-
Head gasket surface sealant.
Head Gasket IssuesAll steel, no coating mls head gasket for my 2009 non turbo outback. 213k miles. I never over heated. Replaceing head gaskets and I will Not be resurfacing the heads if they are not warped. Pulled off the old single layer coated gasket and the gasket is super clean, so I see no reason why they...- 1
- 138
-
Replaced Head Gaskets; engine won't start
Head Gasket IssuesNew guy here folks...please be kind...I replaced the head gaskets on my 1999 Subaru Outback DOHC 2.5L. I have been turning wrenches for some 40 years as a hobby and I considered this job challenging. The car ran fine before I took it apart. I marked everything, took pictures and notes. I put it...- 22
- 18K
-
2001 H6 overheating....but no heat
Head Gasket IssuesI have a 2001 H6 that probably has a blown headgasket, and so it's curtains for the engine (and maybe the car). However, before I start searching around for a JDM or used engine, I want to make sure my heater core isn't also a source of the overheating problem. The A/C still works fine (unless...- 8
- 220
-
Overheating n losing coolant
Head Gasket IssuesStarted with thermostat did all up to gasket.headgskt.worked for 5-6days then started losing coolant and overheating again.so disappointing.anyone have some tips? And if is the purge issue or heater core issue would I be losing coolant?and if is wouldn't I see the leak.thought had to be in...- 3
- 153
-
Overheating subaru · updated
-
New Old purchase
Head Gasket IssuesHello, I am brand new the forum. I joined to hopefully gain some knowledge and ask for advice. I am considering purchasing a 2006 Outback with 168K for 4K. It has no signs of any leaks, has a clean carafe report. The dealer can't confirm wether the timing belter head gasket has been replaced...- 5
- 157
Join now to ask and comment!