Subaru Outback Forums banner
1 - 1 of 1 Posts

·
Registered
2005 Outback XTi Lim. 5 Speed MT "Red Rocket"
Joined
·
30 Posts
Kaitanium here's the easy way for gen 3...For anyone that says this takes two hours must have a really hard time with tools. Took me about 30 min for install.

1: pull off air box/channel and silencer and illuminate the area were you pulled out the box.
2: look in the hole for the silencer by the bottom of the car and follow the wires to the stock horns.
3: unplug both horns (don't mistake for fog lights connector...if you have fogs) and put electrical tape over one of the female cables to keep it clean.
4 plug in the subimods male end and run it to the horns...then battery..done.
 
1 - 1 of 1 Posts
Top