Subaru Outback Forums banner
  • Hey everyone! Enter your ride HERE to be a part of this month's Ride of the Month Challenge!

1 - 4 of 4 Posts

·
Registered
2001 OBW H-6 VDC
Joined
·
16 Posts
Discussion Starter #1
Hey guys, I discovered a rusty spot on my oil pan a few months ago. It finally rusted through and im in need of an oil pan for my 2001 outback wagon H-6 VDC. If anyone can help me out let me know.

Thanks- Jenks
 

·
Registered
2009 Tribeca Now - 2004 Outback EJ259 - Sold
Joined
·
1,069 Posts
80$ online for a new part

PN# 11109AA122

subaruonlineparts.com comes out of Hicksville, NY
 

·
Registered
OBW H6 VDC, Tribeca, XT6
Joined
·
12,385 Posts
as cheap as that is that's a good option. sometimes used pans can have dimpled bolt holes, warped lips, etc that don't seat the gasket as well as used. not that it should be hard to properly seal it though.

Car-Part.com--Used Auto Parts Market and you can find core or junk blocks they'd part out.
 

·
Registered
06 OBW 2.5, 05 Forester, had 03 H6 OBW
Joined
·
5,947 Posts
I used a new one from the dealer for mine, was about the same cost.

Proper gasket goo is critical, I used the permatex ultra-gray, was supposed to be close to the proper fujibond.
 
1 - 4 of 4 Posts
Top