Oil Seperator Plate Question????
1 - 4 of 4 Posts
2014 OBW 3.6R Limited, 1997 OBW 2.5L Auto (sold, but not forgotten), and 1991 Ford F150
Joined
·
1,525 Posts
http://www.subarupartsforyou.com/cp_partdetail.php?partid=11566
Above link is for a kit including the plate and bolts. Separator plate only is part# 11831AA210 ... about $26 + shipping at the online discount places. Don't forget the sealant.
Above link is for a kit including the plate and bolts. Separator plate only is part# 11831AA210 ... about $26 + shipping at the online discount places. Don't forget the sealant.
1 - 4 of 4 Posts
Join the discussion
Recommended Reading
-
New Subaru Owner with questions (Belt Squeak & Suspension)
Problems & MaintenanceI am a Jeep guy that bought his first Subaru, which is a 2014 Outback 2.5 with 70k miles. So I am familiar with Jeep Forums, and I know that the questions I am about to ask have more than likely already been answered in another thread. However, after looking, I have not found the exact answers I...- 6
- 165
-
sblaine · updated
-
General Maintenance
Problems & MaintenanceSo how hard, really, is the maintenance on these Subaru's? The prices at my local dealer are a little high for my liking. $230 to replace the oil in front and rear diffs? $300 for a trans flush?$200 to flush braking system? $80 for an oil change? Seriously wow! I can do all of this in my...- 4
- 73
-
Welcome Suggestions: What would you do?
Problems & MaintenanceDear all, I would like to hear your suggestions or experience. I have a 2016 Outback 2.5i Limited, my first Subaru. I just passed 36K miles and have become increasingly frustrated with the car. 1) My car was part of the steering column recall in 2016, only 3 weeks after the purchase. 2) At 35K...- 14
- 479
-
Another Outback bites the dust???
Problems & MaintenanceI LOVE my 2010 2.5i Limited. It runs like new, but in past year alone I've spent about $6-$8K maintaining and repairing. It has minor signs of wear & tear (door dings), but still very nice looking. About a week and a half ago I was enjoying my drive to Big Bend National Park. Right after...- 37
- 972
-
2006 Baja RPM surges/runs away on start after R&R engine.
Problems & MaintenanceAfter replacing the clutch and flywheel by removing engine. The new parts were installed and the engine was reinstalled. Once all lines, fuel, and power was reconnected, the Baja was started. Upon start the engine RPMs surge to the rev limiter and does not drop. All vacuum lines were checked...- 4
- 75
-
Seedawson · updated
Join now to ask and comment!