Subaru Outback Forums banner

Parking Brake Lever for Gen 1 and Gen 2

1628 Views 4 Replies 3 Participants Last post by  Osei
I need to get a replacement Parking Brake lever for my 1996 Legacy Outback and am wondering if the Parking Brake Lever is interchangeable between Gen 1 and Gen 2 Legacy?

I have found several ones for Gen 2, but still have not found one for my Gen 1.

Thanks in advance.
1 - 5 of 5 Posts

· Registered
2010 OBW limited 2.5 CVT
Joined
·
1,602 Posts
Don't know about the interchange, but have you checked the classified section on this board? There are always cars being parted out. Also check out carpart.com for recyclers in your area that may have what you need.
 

· Registered
Joined
·
288 Posts
According to opposed forces, the 99 MY starts a change with a different part no.
So it doesn't appear to be, w/o actually having both side by side, to check.
Sometimes Subaru uses a different part number, but they are the same (to us) item.

O.
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top