I've got a line on an OEM pet barrier that came out of a 07 outback with a moon roof. I've never been in a non LL bean. Will the mounting points be the same from a standard trim moonroof equipped outback as a ll bean?
Pet Barrier on a 05 LL bean
1 - 2 of 2 Posts
Yes. FWIW, the guard for the moonroof equipped vehicles will fit non-monroof cars with a larger gap at the top. But the non-moonroof guards will not fit cars with the moonroof. As long as it is for the same generation car, the mounting points are the same.
1 - 2 of 2 Posts
Join the discussion
Recommended Reading
-
Old Transmission Mount Cause Of Vibration
Gen 3: 2005-20092 Years ago I had to replace by driveshaft assembly because the rubber bushing holding the center carrier bearing weakened causing severe vibrations. When that started to fail on me it only took a hundred miles or so from first vibration to thinking your transmission is bad. Lucky it was "only"...- 11
- 184
-
stevenva · updated
-
What did you do with your 3rd Gen Outback today?
Gen 3: 2005-2009There's a thread for the other three generations, so why not for us 3rd Gen Owners? Maybe somebody can sticky this? I'll start: I replaced the cheap summer blades that came on my 2008 with Rain-X Latitudes. I've used Bosch's in the past and though they work great I wasn't impressed with...- 5K
- 564K
-
jp1203 · updated
-
PO420 Continuing Saga
Gen 3: 2005-2009I have an '05 2.5i OB stick with 150K miles. The PO420 code has been on for the last several years. The car runs fine. The only problem is every 2 years it needs to be smogged and re-registered. Won't pass smog with the CEL and PO420 codes on. Manual re-set of the codes clears the codes but...- 7
- 452
-
2006 Outback 2.5i inconsistent power steering
Gen 3: 2005-2009In the last 2 days or so a weird issue has popped up with my power steering. in general the steering feels heavier, and it pulses power in corners. sometimes it cuts out for a short period of time in sharper corners. The belt looks to be in good condition, though i haven’t had any time to check...- 19
- 387
-
roof mount antenna?
Gen 3: 2005-2009Has anyone tried installing a roof mount antenna from a newer generation? I'm looking out the window at work, and just about every car in the lot has a shark fin/antenna on it. Seems like it would be a lot better reception than the directional one built into the glass..... Matt- 2
- 51
Join now to ask and comment!