[jeverson]

Hey guys, I am trying to replace my rear brakes and rotors but am having a hard figuring out how to get the rear calipers off. There is a 14mm bolt at the bottom that has no clearance for any kind of socket I can find and wrench will not grab the bolt because of a shield that is in place. What do I have to do to get these off? Thanks.

 

[Wagondude]

it requires a few extensions on the socket and some snaking through the suspension links. for one of the bolts, you have to go through a hole in the trailing arm. You may need to jack up the trailing arm slightly to line up the hole with the bolt so the socket will go on straight.

 

[jeverson]

Hmm... I don't recall seeing any kind of pass through near the bolt the last few times I had it up. I'll look again next chance I get. Thanks.

EDIT: Let me clarify, I see the pass through for the top bolt but not the bottom bolt. Thanks.

 

[1 Lucky Texan]

maybe yours is like this???;

from;http://www.scoobymods.com/showthrea...14125.html?t=14125&highlight=hba+bearing+14mm

 

[jeverson]

Hmm... I will check it out. Will probably be the following weekend. Thanks.