Subaru Outback Forums banner
1 - 1 of 4 Posts

· Registered
'19 Forester Premium '18 Forester Limited
2,408 Posts
Is that for an '03 or '04 Outback? I installed it on my '02 . I probably have the actual sheet at home, but this should do. It looks like a slight variation (prior part number) - H7110LS100.

What's it worth to you??? Just kidding. I put it on my download site for you here.

I didn't follow the instructions exactly with respect to where to mount the controller/sensing unit. They want you to pull out the HVAC/Radio, and mount it beside this assembly. The problem with that is you then have no future access to the sensitivity control pot without disassembling the whole dash again. Instead I made my own bracket and mounted it down low to the left of the glove box. It works just as well, and was easy to fine tune. If you are interested in exploring this, I see if I still have the pictures somewhere.
1 - 1 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.