Hi all, thanks so much for your thoughtful responses- this is obviously a concern because the $$$$ involved.
To answer your questions:
1. Yes, it's a Subaru dealership and it's part of their service center.
2. The CEL is: P0171 for system too lean (bank 1). Tech felt slight stuble during idle and noticed slight roughness on the monitor for cylinder #4. They reset CEL.
3. They recomended that if CEL returns cylinder misfire, they will need to do a valve adjustment and change of timing belt during that time.
4. Tech also found right front axle boot torn and lost all grease. Left side starting to crack. For each one, they said cost would be about $400 for a refurbused Subaru part- so immediate cost of $400, then another $400 within the next 12 months as the other one is starting to crack.
Any thoughts on this? Should I still see another dealer for a second opinion?
Thanks again!
John
To answer your questions:
1. Yes, it's a Subaru dealership and it's part of their service center.
2. The CEL is: P0171 for system too lean (bank 1). Tech felt slight stuble during idle and noticed slight roughness on the monitor for cylinder #4. They reset CEL.
3. They recomended that if CEL returns cylinder misfire, they will need to do a valve adjustment and change of timing belt during that time.
4. Tech also found right front axle boot torn and lost all grease. Left side starting to crack. For each one, they said cost would be about $400 for a refurbused Subaru part- so immediate cost of $400, then another $400 within the next 12 months as the other one is starting to crack.
Any thoughts on this? Should I still see another dealer for a second opinion?
Thanks again!
John