Does anybody have a picture of the engine bay for the 2001 Subaru Outback (LOB). Non-MAF variant that has the intake to the front not the fender. I just got my Cosmo Racing SRI, and would like to have one of those pics so I can figure out some things before I get back from deployment.
gryffinwings
Thanks I think that is practically the same, only difference I think there is is placement of the sensor right before the throttle body is place on the front of the airbox if I'm not mistaken, I think that's the MAP sensor right?FMGreen said:Here is my 2002 (cleeeeeean!). It should be the same as the '01.
![Image]()
Check my member gallery here: http://www.subaruoutback.org/photopost/showgallery.php?ppuser=13396&cat=500&thumb=1
It's a 2.5 Limited, 2001. Let me know if you want pics of anything else.
It's a 2.5 Limited, 2001. Let me know if you want pics of anything else.
Dalrain said:
Actually that's exactly what I have, I got a Cosmo Racing Intake but I'm not sure where that one sensor goes that's on the left side of the airbox goes on my new intake, any ideas?
The intake I recieved has three places to put what I believe are vacuum hoses, I'm not sure if I can remember if there were three at all. Thanks for anything anybody can come up with.
Just looking at what you're looking, the only hose I'm sure of there is the one feeding into the PCV line at a tee there. (Which I was interested in for purposes of seafoaming, hence the closeup. 
)
Re: Stuff that feeds into the air filter box:
The sensor is the "Intake air temperature sensor"
(...aaaand I'll have to read the service manual a bit more to find out what's actually going in there as far as the hoses go in their entirety.)
) Re: Stuff that feeds into the air filter box:
The sensor is the "Intake air temperature sensor"
(...aaaand I'll have to read the service manual a bit more to find out what's actually going in there as far as the hoses go in their entirety.)
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
